 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|||||||||||||||||||||||||||||
 |
 |
|
|||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
|
||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
| Serving Florida 800 801 1727 |
|
||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
|
|
|
||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
| We do not perform remediation or removal since is a conflict of interest. We provide non bias inspection and air quality assessments. |
 |
|
|||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
Why inspect or test for Mold |
|
|||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||||||||||||||||||||||
 |
Accredited Lab All samples are analyzed by accredited labs. We work with Emlab and Emsl two of the best labs in the country. |
 |
|
||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
 |
 |
The purpose of a mold inspection is to determine the presence of mold spores in an indoor environment, our mold inspection will determine what kind of mold genus were found, the amounts found in the air or a surface if mold is visible and if the amount of spores found are normal for that environment or elevated. Another purpose of a mold inspection is to determine the cause of the indoor air quality problem and the solution. |
 |
|
|||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
 |
 |
Latest equipment We use the latest technology in every inspection including latest models of Infrared thermal cameras, hygrometers, particle counters and more. |
|
||||||||||||||||||||||||||||||||||||||
 |
Mold and your Health |
|
|||||||||||||||||||||||||||||||||||||||
  |
|
||||||||||||||||||||||||||||||||||||||||
 |
We are exposed to many
kinds of mold both indoors and outdoors. The exposure is
greater in damp or wet conditions, especially when timely drying out
does not have a chance to occur. Of the thousands of molds that
exist, some are known allergens (aggravating or causing skin, eye
and respiratory problems) and a few molds produce harmful mycotoxins
that can cause serious problems. But all molds, in the right
conditions and high enough concentrations, are capable of adversely
affecting human health. The potential for health problems occurs
when people inhale large quantities of the airborne mold spores. For
some people, however, a relatively small number of mold spores can
cause health problems. Infants, children, immune-compromised
patients, pregnant women, individuals with existing respiratory
conditions and the elderly are at higher risks for adverse health
effects from mold. |
 |
|
||||||||||||||||||||||||||||||||||||||
 |
Qualifications • Over 10 years of experience. • Certified Indoor Environmentalists • Certified Mold Inspectors • State Certified Radon Technicians • Better Business Bureau A rated company • Indoor Air Quality Association members • Over 4500 inspections performed
|
|
|||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
 |
Mold law passed in Florida |
 |
|
||||||||||||||||||||||||||||||||||||||
 |
Senate bill 2234 was signed into law on June 28, 2007. This law, when effective will prevent conflicts of interest, require education and licensing amongst other requirements for mold inspectors and removal companies alike. This law was designed to protect the consumers. Unfortunately the law will not be effective until 2010; until then there are no requirements. Beware when hiring an inspection company. Can our competitors meet the requirements? We can. To view law click here
|
|
|||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||
|
Consumers beware |
|
||||||||||||||||||||||||||||||||||||||||
|
Many Mold inspection companies only perform “Mold Testing”. Mold testing should not be confused with a Mold Inspection. Mold testing refers to collecting air or surface samples which are analyzed by a laboratory, this procedure will only determine the mold spore count and spore identification. This process will not help determine what caused the problem, the source or the solution to it; but is very helpful when performed in conjunction with a full inspection. A mold inspection report should at least include: • Air and or surface sampling • Findings of visual assessment • Borescope inspection • Air Conditioning test and inspection • Identification of water intrusion sources • Relative Humidity and condensation readings • infrared thermal imaging inspection • Particle counts • Building pressure test • Moisture detection • Prevention and correction Recommendations |
|
||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||
|
Home - About us - Blog - Contact Us - Live Chat - FAQ's - Fungi Glossary - SiteMap |
|
||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
